Information about wood drying<\/h2>\n
[\/vc_column_text][vc_empty_space height=”30px”][vc_separator color=”custom” align=”align_left” border_width=”2″ css_animation=”fadeIn” accent_color=”#fe0000″][vc_empty_space height=”30px”][vc_row_inner][vc_column_inner offset=”vc_col-lg-8 vc_col-md-8 vc_col-xs-12″][vc_column_text]<\/p>\n
How to get optimal wood drying<\/h3>\n
Drying wood has until now been associated with a very high energy consumption. In cooperation with Silkeborg Pallefabrik A\/S, DANHEAT A\/S has developed a system whereby the drying process can be optimized and the energy consumption is reduced significantly.<\/p>\n
Drying of wood has hitherto been associated with a very high energy consumption, but by means of a recycling principle in the drying cabinet, where fresh air is only supplied during periods when the relative humidity is so high that the air cannot \u201ccarry\u201d more water.<\/p>\n
In a conventional drying plant, constantly heated fresh air is applied, which is immediately sucked out, this is very energy-intensive, as the air in this system is not steam-fired with major energy losses. At the recirculation system, not only is the heating energy reduced, but it also saves on electricity consumption. To a plant that can dry approx. 600 EUR pallets, the installed electric load is only 25 kW.<\/p>\n
In other words, it is common sense to invest in a plant, and our specialists are advised to provide advice.[\/vc_column_text]
If the temperature is higher than the temperature setpoint set on the temperature controller, signal is sent to the 3\/2 way control valve to increase the cooling water flow.<\/p>\n
If the discharge temperature drops, the control valve will correspondingly reduce the flow of cooling water.<\/p>\n
If there are deviations of more than 2 gr C at the current outlet temperature and the temperature set.[\/vc_toggle][vc_empty_space height=”30px”][vc_toggle title=”Accessories” style=”square” color=”black” css_animation=”fadeIn”]Alternatively, in addition to the components described above, the switch can be fitted with:<\/p>\n
Temperature regulator with alarm function: The sensors detect the temperature of return water and replacement water, if an error occurs between the two temperatures, an alarm is given.<\/p>\n
Connection pressure switch for differential pressure\u2019s pressure switch, as well as for differential pressure switches that emit alarm, if deposits begin to stop the heat exchanger.[\/vc_toggle][vc_empty_space height=”30px”][vc_toggle title=”Drawings and pictures” style=”square” color=”black” css_animation=”fadeIn”]<\/p>\n
<\/a>\n\t\t\t<\/div><\/figure>