Information about Steam boiler CONDOR AUTOMAT

CONDOR AUTOMAT is a three pass boiler where all boiler tubes is below the boiler min. water level . The powerful boiler tubes are dimensioned with such a surface , the boiler can achieve optimum efficiency without the use of turbulators on
flue gas .

This implies that there is a low thermal load on the heating surfaces of the boiler , the boiler and therefore suitable both at constant and varied the steam load.

CONDOR AUTOMAT ‘s characteristics :

  • All boiler tubes under my . water level
  • Over sizing of the boiler heating surfaces
  • Low thermal load
  • Excellent fuel economy in both liquid and gaseous fuels
  • No turbulators therefore easy maintenance

All pressure parts of the boiler is performed in accordance with PED 97/23 / CEE and quality assurance includes X-ray photography of the boiler welded joints.

Technical information

Boiler body: Cylindrical design in certified steel plates.

Front door: Powerful insulation with piston insulation, easy to open for inspection of firebox and convection pipe.

Convection pipes: High quality steel pipes – all pipes are welded on the front and rear manifold of the boiler.

Pipe manifold: Alle transistions are manually drilled in the steel plate to avoid craskings in the steel.

Connections: All boiler connections are made with welded flanges.

Insulation: Boiler body is insulated with 70 mm mineral wool and exterior coated with powder coated steel plates.

Foundation: The boiler is supplied on a steel foundation for easy installation

For bottled or natural gas

Condensing design

Extract horizontally or vertically

Simple and service friendly